Cavity: T-5A
Capacity: 12 gpm (.25 inch)
Maximum Operating Pressure: 5000 psi
Maximum Valve Leakage at 110 SUS (24 cSt): 10 drops/min.
Adjustment – No. of CCW Turns from Fully Closed to Fully Open: 5

Needle valves with reverse-flow check are fully adjustable orifices used to regulate flow. They are infinitely adjustable from fully closed up to the maximum orifice diameter. An integral high-capacity check valve provides unrestricted flow from port 2 to port 1. They are not pressure compensated.

The Sun Hydraulics FXCA-XAN-2.50LPM + GPB is a complete hydraulic assembly consisting of a fixed-orifice, pressure-compensated flow control cartridge (FXCA-XAN) pre-set to a flow rate of 2.50 LPM, mounted in an ISO 03 sandwich body (GPB).

This assembly functions as a pressure-compensated flow regulator. Regardless of varying load pressures or pump fluctuations, it maintains a steady output of 2.50 Liters Per Minute (LPM) with an accuracy of +/- 10%. The sharp-edged orifice design ensures that performance remains stable even if fluid viscosity changes due to temperature shifts.

Cartridge: FDCB-LAN: Fixed-setting or adjustable flow control with reverse check
Flow Range: Typically 4 to 50 L/min (approx. 1 to 13 GPM)
Body: GBZ (CETOP 03, Dual Meter-in, Gauge port).Adjustment: “L” denotes standard screw adjustment
Seal Material: “N” indicates Buna-N seals
Porting: ISO 03 (CETOP 3) sandwich body (A and B ports)

The Sun Hydraulics FDCB-LAN+K-GBZ is a sandwich-mount flow control valve with an integrated reverse check, typically used for metering flow into ports A and B on a CETOP 03 (ISO 03) interface, with a pressure rating of 5000 psi. The assembly includes a “LAN” flow regulator and a “GBZ” sandwich manifold body.

Type: 2-way, direct-acting blocking poppet valve
Capacity: Up to 40 L/min (approx. 10 gpm)
Maximum Pressure: 350 bar (5,000 psi)
Cavity: T-13A cavity
Control Option (M): Features a Manual Override (Push type)

The Sun Hydraulics DTDA-MHN is a 2-way, direct-acting, solenoid-operated directional blocking poppet valve commonly paired with the 770-224 24 VDC coil. This assembly is primarily used for precision hydraulic control in industrial and marine systems.

Cavity: T-32A
Capacity: 3 – 15 gpm
Maximum Operating Pressure: 5000 psi
Divisional Accuracy at Minimum Input Flow: ±6.5%
Divisional Accuracy at Max Input Flow: ±3.5%

Flow dividers are sliding-spool, pressure-compensated devices used to split oil flow to two different branches of a circuit in a designated ratio. These valves are suitable for applications that use the following: unidirectional hydraulic motors, hydraulic cylinders where flow division in one direction only is required, and multiple circuits that are serviced from one pump supply.

Cavity: T-31A
Capacity: 1.5 – 8 gpm
Maximum Operating Pressure: 5000 psi
Divisional Accuracy at Minimum Input Flow: 50% ±4.5%
Divisional Accuracy at Max Input Flow: 50% ±2.5%

Synchronizing flow divider/combiners are sliding-spool, pressure-compensated devices used to split flow in one direction and combine flow in the opposite direction. With a sychronizing feature, these valves can be used to allow two hydraulic cylinders to fully stroke and synchronize at the end of the stroke. When the first cylinder has reached the end of its stroke, a pressure-compensated, reduced flow is metered to or from the second cylinder until it also reaches the end of its stroke.

Cavity: T-11A
Capacity: 7 gpm
Maximum Operating Pressure: 5000 psi
Factory Pressure Settings Established at: 4 gpm

Pilot-operated, 3-way directional cartridges (1 blocked, 2 to 3 open) are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.

Cavity: T-13A
Capacity: 15 gpm
Maximum Operating Pressure: 5000 psi
Maximum Valve Leakage at 110 SUS (24 cSt): 10 drops/min.@5000 psi
Check Cracking Pressure: 50 psi
Response Time – Typical: 30 ms

This solenoid controlled, 2-way, 2-position cartridge is a pilot-operated, poppet style directional valve with reverse free flow check. It is available in either a normally open or normally closed configuration. Due to its poppet style construction, it has extremely low leakage.

Cavity: T-18A
Capacity: 160 gpm
Maximum Operating Pressure: 5000 psi
Maximum Valve Leakage at 110 SUS (24 cSt): 1 drops/min.
Valve Hex Size: 1 5/8 in.
Valve Installation Torque: 350 – 375 lbf ft

Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to the outlet (port 2) and block flow in the opposite direction.

Cavity: T-16A
Capacity: 80 gpm
Maximum Operating Pressure: 5000 psi
Maximum Valve Leakage at 110 SUS (24 cSt): 1 drops/min.
Valve Hex Size: 1 1/4 in.
Valve Installation Torque: 150 – 160 lbf ft

Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to the outlet (port 2) and block flow in the opposite direction.