Cavity: T-13A
Capacity: 15 gpm
Maximum Operating Pressure: 5000 psi
Maximum Valve Leakage at 110 SUS (24 cSt): 10 drops/min.@5000 psi
Check Cracking Pressure: 50 psi
Response Time – Typical: 30 ms

This solenoid controlled, 2-way, 2-position cartridge is a pilot-operated, poppet style directional valve with reverse free flow check. It is available in either a normally open or normally closed configuration. Due to its poppet style construction, it has extremely low leakage.

Cavity: T-18A
Capacity: 160 gpm
Maximum Operating Pressure: 5000 psi
Maximum Valve Leakage at 110 SUS (24 cSt): 1 drops/min.
Valve Hex Size: 1 5/8 in.
Valve Installation Torque: 350 – 375 lbf ft

Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to the outlet (port 2) and block flow in the opposite direction.

Cavity: T-16A
Capacity: 80 gpm
Maximum Operating Pressure: 5000 psi
Maximum Valve Leakage at 110 SUS (24 cSt): 1 drops/min.
Valve Hex Size: 1 1/4 in.
Valve Installation Torque: 150 – 160 lbf ft

Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to the outlet (port 2) and block flow in the opposite direction.

Cavity: T-16A
Capacity: 80 gpm
Maximum Operating Pressure: 5000 psi
Maximum Valve Leakage at 110 SUS (24 cSt):1 drops/min.
Valve Hex Size: 1 1/4 in.

Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to the outlet (port 2) and block flow in the opposite direction.

Cavity: T-16A
Capacity: 80 gpm
Maximum Operating Pressure: 5000 psi
Maximum Valve Leakage at 110 SUS (24 cSt): 1 drops/min.
Valve Hex Size: 1 1/4 in.

Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to the outlet (port 2) and block flow in the opposite direction.

Cavity: T-5A
Capacity: 40 gpm
Maximum Operating Pressure: 5000 psi
Maximum Valve Leakage at 110 SUS (24 cSt): 1 drops/min.

Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to the outlet (port 2) and block flow in the opposite direction.

Cavity: T-13A
Capacity: 20 gpm
Maximum Operating Pressure: 5000 psi
Maximum Valve Leakage at 110 SUS (24 cSt): 1 drops/min.

Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to the outlet (port 2) and block flow in the opposite direction.

Cavity: T-162A
Capacity: 10 gpm
Maximum Operating Pressure: 5000 psi
Maximum Valve Leakage at 110 SUS (24 cSt): 1 drops/min.

Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to the outlet (port 2) and block flow in the opposite direction.

Cavity: T-23A
Capacity: 60 gpm
Maximum Operating Pressure: 5000 psi
Pilot Ratio: 3:1

This valve is a pilot to open check valve. It has a sealed pilot, a steel seat, and is vented. It allows free flow from the valve (port 2) to the load (port 1) and blocks flow in the opposite direction. Pressure at the pilot (port 3) will open the valve from port 1 to port 2. Pilot pressure needed to open the valve is directly proportional to the load pressure at port 1. The valve is insensitive to pressure at port 2 because the spring chamber is referenced to the vent (port 4).

The Sun Hydraulics CVCV-XCN + MAV/S combination is a cartridge valve assembly consisting of a pilot-operated check valve (CVCV) in a line-mounted body (MAV/S).
Assembly Components:
Cartridge: CVCV-XCN – This is a pilot-to-open check valve.
–> Pilot: Pilot to open.
–> Seal: Nitrile (N).
–> Adjustment: Standard screw adjustment (X), though for a check valve, this usually indicates no external adjustment, or a standard, non-adjustable model.
Body: MAV/S – This is a line-mounted assembly.
–> Material: The /S modifier indicates the body is made of SG Iron (ductile iron), which is required for pressures exceeding 210 bar (3000 psi).
–> Application: It is commonly used as a check valve with a reverse free-flow and a gauge port.